Injection Moulding Machine
Our range of products include 300t plastic injection moulding machine, tokima injection moulding machine, tokima 160 t, 650 ton toggle injection moulding machine, 100 ton plc based injection moulding machine and automatic horizontal plastic injection moulding machine.
300T Plastic Injection Moulding Machine
Request Callback
₹ 3655000 / Unit Get Latest Price
Product Brochure
| Automation Grade | Automatic |
| Condition | New |
| Machine Structure | Horizontal |
| Voltage (V) | 220-240 |
| Brand | Tokima |
| Clamping Tonnage | 270 tonne |
| Heater Power | 14.9 kW |
| Machine Weight | 8.5 tonne |
| Hopper Capacity | 50 ltrs |
| Oil Tank Capacity | 560 ltrs |
| Toggle Stroke | 550 mm |
| Space between Tie Bar | 580 x 580 mm |
| Max Mould Height | 600 mm |
| Min Mould Height | 230 mm |
| Ejector Stroke | 145 mm |
| Ejector Tonnage | 70 kN |
| Max Pump Pressure | 175 kg/cm3 |
| Pump Motor Power | 22 kW |
We are offering 270T Plastic Injection Moulding Machine to our clients.We are offering PLC Based Injection Moulding Machine to our clients.
Clamp Unit:
Injection Unit:
Hydraulic System:
Clamp Unit:
- 5 Point toggle clamping System Of steel Casting with steel link and Steel pin.
- Hydraulic ejector through the plate with multiple ejector cycles up to 9 strokes.
- Multiple point automatic lubrication system.
- Clamp closing and clamp opening profile with programmable and independent strokes and speeds.
- Low-pressure mould protection.
- Freely programmable control of max.2 core pulls and air for the control of max 1 valve.
Injection Unit:
- Injection movement is actuated by two hydraulic cylinders for perfect alignment to the clan unit
- Injection unit sliding on hard chrome steel treated, ground tie-bars easy access to the screw is ensured by the swivelling movement
- Gas nitride screw barer with standard l/d ratio
- Stainless Steel hopper with magnetic grill mounted on a swivelling system to permit easy change of material
- Injection Speed, pressure and holding time profile on 7 steps
- Cold start protection
Hydraulic System:
- Components easily accessible for maintenance purposes
- Suction and delivery oil filters
- Proportion valves for pressure and delivery control with electronic feedback
- Sealed oil tank with oil temperature Control
- Resiliently mounted hydraulic pump
Tokima Injection Moulding Machine
Request Callback
₹ 2350000 / Unit Get Latest Price
Product Brochure
| Phase | Three Phase |
| Automation Grade | Automatic |
| Machine Structure | Horizontal |
| Clamping Force | 100-300 ton |
| Condition | New |
| Brand | Tokima |
Minimum order quantity: 1 Unit
Our company engages in manufacturing and trading Tokima Injection Moulding Machine that can be availed on multiple specifications.We are offering PLC Based Injection Moulding Machine to our clients.
Clamp Unit:
Injection Unit:
Hydraulic System:
Clamp Unit:
- 5 Point toggle clamping System Of steel Casting with steel link and Steel pin.
- Hydraulic ejector through the plate with multiple ejector cycles up to 9 strokes.
- Multiple point automatic lubrication system.
- Clamp closing and clamp opening profile with programmable and independent strokes and speeds.
- Low-pressure mould protection.
- Freely programmable control of max.2 core pulls and air for the control of max 1 valve.
Injection Unit:
- Injection movement is actuated by two hydraulic cylinders for perfect alignment to the clan unit
- Injection unit sliding on hard chrome steel treated, ground tie-bars easy access to the screw is ensured by the swivelling movement
- Gas nitride screw barer with standard l/d ratio
- Stainless Steel hopper with magnetic grill mounted on a swivelling system to permit easy change of material
- Injection Speed, pressure and holding time profile on 7 steps
- Cold start protection
Hydraulic System:
- Components easily accessible for maintenance purposes
- Suction and delivery oil filters
- Proportion valves for pressure and delivery control with electronic feedback
- Sealed oil tank with oil temperature Control
- Resiliently mounted hydraulic pump
Tokima 160 T
Request Callback
₹ 2600000 / Piece Get Latest Price
Product Brochure
| Machine Type | Plastic injection moulding machine |
| Capacity | 160 Ton |
| Brand | TOKIMA |
| Clamping Force | 100-300 ton |
| Material | ABS, pp, nylon |
| Automation Grade | Automatic |
| Machine Structure | Horizontal |
| Tonnage | 160-650 |
TOKIMA superior quality model. We are offering PLC Based Injection Moulding Machine to our clients.
Clamp Unit:
Injection Unit:
Hydraulic System:
Clamp Unit:
- 5 Point toggle clamping System Of steel Casting with steel link and Steel pin.
- Hydraulic ejector through the plate with multiple ejector cycles up to 9 strokes.
- Multiple point automatic lubrication system.
- Clamp closing and clamp opening profile with programmable and independent strokes and speeds.
- Low-pressure mould protection.
- Freely programmable control of max.2 core pulls and air for the control of max 1 valve.
Injection Unit:
- Injection movement is actuated by two hydraulic cylinders for perfect alignment to the clan unit
- Injection unit sliding on hard chrome steel treated, ground tie-bars easy access to the screw is ensured by the swivelling movement
- Gas nitride screw barer with standard l/d ratio
- Stainless Steel hopper with magnetic grill mounted on a swivelling system to permit easy change of material
- Injection Speed, pressure and holding time profile on 7 steps
- Cold start protection
Hydraulic System:
- Components easily accessible for maintenance purposes
- Suction and delivery oil filters
- Proportion valves for pressure and delivery control with electronic feedback
- Sealed oil tank with oil temperature Control
- Resiliently mounted hydraulic pump
650 Ton Toggle Injection Moulding Machine
Request Callback
₹ 8500000 / Unit Get Latest Price
Product Brochure
| Automation Grade | Automatic |
| Raw Material | PS, HDPE, PP, PMMA, PE |
| Machine Structure | Horizontal |
| Machine Type | injection moulding machine |
| Clamping Force | 500-1000 ton |
| Orientation | Horizontal |
| Condition | New |
| Plastic Type | PET, PE, PP, PVC |
| Phase | Three Phase |
| Brand | Tokima |
Minimum order quantity: 1 Unit
We are offering Toggle Injection Moulding Machine to our clients.
Features:
Features:
- Toggle Mechanism give speedy cycle
- Higher Mould Weight Carrying Capacity
- Heavy Toggle Mechanism increase machine life
100 ton PLC Based Injection Moulding Machine
Request Callback
₹ 1650000 / unit Get Latest Price
Product Brochure
| Brand | Tokima |
| Capacity ( ton per day) | 50 to 100 |
| Clamping Way | Hydraulic |
| Operation Mode | Automatic |
| Voltage (V) | 220-240 |
| Condition | New |
We are offering PLC Based Injection Moulding Machine to our clients.
Clamp Unit:
Injection Unit:
Hydraulic System:
Clamp Unit:
- 5 Point toggle clamping System Of steel Casting with steel link and Steel pin.
- Hydraulic ejector through the plate with multiple ejector cycles up to 9 strokes.
- Multiple point automatic lubrication system.
- Clamp closing and clamp opening profile with programmable and independent strokes and speeds.
- Low-pressure mould protection.
- Freely programmable control of max.2 core pulls and air for the control of max 1 valve.
Injection Unit:
- Injection movement is actuated by two hydraulic cylinders for perfect alignment to the clan unit
- Injection unit sliding on hard chrome steel treated, ground tie-bars easy access to the screw is ensured by the swivelling movement
- Gas nitride screw barer with standard l/d ratio
- Stainless Steel hopper with magnetic grill mounted on a swivelling system to permit easy change of material
- Injection Speed, pressure and holding time profile on 7 steps
- Cold start protection
Hydraulic System:
- Components easily accessible for maintenance purposes
- Suction and delivery oil filters
- Proportion valves for pressure and delivery control with electronic feedback
- Sealed oil tank with oil temperature Control
- Resiliently mounted hydraulic pump
Automatic Horizontal Plastic Injection Moulding Machine
Request Callback
₹ 1850000 / Unit Get Latest Price
Product Brochure
| Phase | Three Phase |
| Automation Grade | Automatic |
| Capacity ( ton per day) | 50 to 100 |
| Structure | Horizontal |
| Condition | New |
| Brand | Tokima |
Minimum order quantity: 180 Unit
We are offering Automatic Horizontal Plastic Injection Moulding Machine to our clients.Being one of the trustworthy names of the business, we bring forth Energy Saving Injection Moulding Machine. Procured from our vendors, the proffered selection is applauded for its durable plastic body, speedy operation, efficient performance, tough construction and low maintenance.
Features:
Features:
- Longer service life
- Operationally fluent
- Easy to operate
PET Perform Injection Moulding Machine
Request Callback
₹ 1900000 / Piece Get Latest Price
Product Brochure
| Machine Type | Preform Injection |
| Automation Grade | Automatic |
| Brand | Tokima |
| Machine Structure | Horizontal |
| Condition | New |
| Toggle Stroke | 430 mm |
| Tie Bars | 460 mm |
| Max Mould Height | 480 mm |
| Min Mould Height | 180 mm |
| Ejector Stroke | 120 mm |
| Ejector Tonnage | 45 kN |
Minimum order quantity: 1 Piece
Being one of the leading makers and providers of this Small Plastic PET Perform Injection Moulding Machine, we never compromise with its standard of quality. Thus we engage in the utilization of high grade raw materials and modern machines, following the set industry norms and guidelines.
Features:
Specifications:
Features:
- User friendly
- Commendable capacity
- Impeccable performance
Specifications:
| Clamping tonnage | Tonne | 40 | 70 | 90 | 150 | 180 | 220 | 270 | 320 |
| Toggle stroke | mm | 220 | 265 | 320 | 375 | 430 | 470 | 550 | 670 |
| Tie bars | mm | 275 | 315 | 365 | 410 | 460 | 510 | 580 | 660 |
| Max. mould height | mm | 275 | 320 | 380 | 450 | 480 | 550 | 600 | 700 |
| Min. mould height | mm | 110 | 120 | 150 | 180 | 180 | 200 | 230 | 240 |
| Ejector stroke | mm | 60 | 75 | 100 | 115 | 120 | 130 | 145 | 160 |
| Ejector tonnage | kN | 20 | 27 | 27 | 33 | 45 | 70 | 70 | 120 |
220T Plastic Injection Moulding Machine
Request Callback
₹ 2925000 / Unit Get Latest Price
Product Brochure
| Operation Mode | Manual, Automatic, Semi-Automatic |
| Automation Grade | Automatic |
| Capacity ( ton per day) | 150 to 200 |
| Structure | Horizontal |
| Clamping Way | Hydraulic |
| Plastic Type | PE, PA, PP, ABS |
| Machine Type | PLASTIC INJECTION MOULDING MACHINE |
| Condition | New |
| Machine Structure | Horizontal |
| Raw Material | HDPE, PE, PP, PS, PMMA |
| Brand | Tokima |
| Clamping Tonnage | 200 tonne |
| Toggle Stroke | 480 mm |
| Space between Tie Bar | 520 x 520 mm |
| Max Mould Height | 550 mm |
| Min Mould Height | 200 mm |
| Ejector Stroke | 140 mm |
| Ejector Tonnage | 60 kN |
| Max Pump Pressure | 175 kg/cm3 |
| Pump Motor Power | 17.5 kW |
| Heater Power | 12.5 kW |
| Machine Weight | 6.9 tonne |
| Hopper Capacity | 50 ltrs |
| Oil Tank Capacity | 420 ltrs |
We are offering 200T Plastic Injection Moulding Machine to our clients.We are offering PLC Based Injection Moulding Machine to our clients.
Clamp Unit:
Injection Unit:
Hydraulic System:
Clamp Unit:
- 5 Point toggle clamping System Of steel Casting with steel link and Steel pin.
- Hydraulic ejector through the plate with multiple ejector cycles up to 9 strokes.
- Multiple point automatic lubrication system.
- Clamp closing and clamp opening profile with programmable and independent strokes and speeds.
- Low-pressure mould protection.
- Freely programmable control of max.2 core pulls and air for the control of max 1 valve.
Injection Unit:
- Injection movement is actuated by two hydraulic cylinders for perfect alignment to the clan unit
- Injection unit sliding on hard chrome steel treated, ground tie-bars easy access to the screw is ensured by the swivelling movement
- Gas nitride screw barer with standard l/d ratio
- Stainless Steel hopper with magnetic grill mounted on a swivelling system to permit easy change of material
- Injection Speed, pressure and holding time profile on 7 steps
- Cold start protection
Hydraulic System:
- Components easily accessible for maintenance purposes
- Suction and delivery oil filters
- Proportion valves for pressure and delivery control with electronic feedback
- Sealed oil tank with oil temperature Control
- Resiliently mounted hydraulic pump
Injection Moulding Machines
Request Callback
Features:
₹ 1345000 / Piece Get Latest Price
Product Brochure
| Voltage | 220-440 V |
| Motor | 5-7.5 hp |
| Raw Material | PE, HDPE, Rubber, PP, PVC |
| Machine Type | semi automatic injection moulding machine |
| Machine Structure | Horizontal |
| Clamping Force | 100-300 ton, 0-100 ton |
| Orientation | Horizontal |
| Condition | New |
| Phase | Three Phase |
| Brand | Tokima |
| Plastic Type | PVC, PP, PET, PE |
| Automation Grade | Semi-Automatic, Manual, Automatic |
| Mould Cavity | 2 cavity, 3 cavity, 4 cavity, 1 cavity |
| Application | Bottles, PET Jars, Plastic Bottles, Plastic Jar, Mineral Water Bottles and Mineral Water Jars |
We are engaged in providing our clients with a comprehensive range of Semi Automatic Injection Moulding Machine, which is known for its various features.Being one of the trustworthy names of the business, we bring forth Energy Saving Injection Moulding Machine. Procured from our vendors, the proffered selection is applauded for its durable plastic body, speedy operation, efficient performance, tough construction and low maintenance.
Features:
- Longer service life
- Operationally fluent
- Easy to operate
TOKIMA SERVO 140 Q SERIES
Request Callback
₹ 1950000 / Piece Get Latest Price
Product Brochure
| Machine Type | injection moulding machine |
| Brand | TOKIMA |
| Screw Diameter | 38-55 |
| Country of Origin | Made in India |
| Minimum Order Quantity | 1 |
Minimum order quantity: 1 Piece
TOKIMA produces wide range of plastic injection molding machines more than 20 times with mold clamp force ranging from 70 to 1000 tons and injection weight grams 48 grams to 4000grams. Our Product integrates the latest mechanical, electrical and hydraulic technologies into one which includes servo enery-saving series, rugged design series, thin wall series, pet series, PVC and bottle cap series.
Plastic Injection Moulding Machine
Request Callback
₹ 4200000 / Number Get Latest Price
Product Brochure
| Brand | TOKIMA 350TON |
| Operation Mode | Automatic |
| Structure | Horizontal & Vertical |
| Phase | Three Phase |
| Clamping Way | Hydraulic |
We, Anantha Naayaki Enterprises, with our establishment in the year, 1996, are one among the eminent manufacturers of a wide range of the range of Injection Moulding Machine, Cooling Tower, Hopper Dryer, Plastic Scrap Grinder Machine, Injection Moulding Machine Controller, and Cap Moulding Machine. These machines are appreciated for precision designing, easy to operate, corrosion resistance, high performance, and durability. We are also involved in providing maintenance and repairing services for these machines.
TOKIMA HOPPER DRYER (TM HD 50 KG)
Request Callback
₹ 35000 / Piece Get Latest Price
| Capacity | 50 Kg |
| Color | WHITE |
| Phase | SINGLE |
| Voltage | 220V/50HZ/1N |
| Brand | TOKIMA |
| Country of Origin | Made in India |
| DIMENSION (CM) | 87*54*121 |
| HEATING POWER (KW) | 4.5 |
| BLOWER POWER (KW) | 0.157 |
* Digital Display Temperature Controller.
* Stainless Steel Cone Screen.
* Copper core Blower Durable.
* Thickened Insulation Cloth.
* Adapt Hot Air diffuser to keep plastics dry & temperature stable.
* Stainless steel Inner Wall.
* Intelligent Tempersture Controller.
* Hopper seperated from its base, ensuring convenient cleaning.
* Stainless Steel Cone Screen.
* Copper core Blower Durable.
* Thickened Insulation Cloth.
* Adapt Hot Air diffuser to keep plastics dry & temperature stable.
* Stainless steel Inner Wall.
* Intelligent Tempersture Controller.
* Hopper seperated from its base, ensuring convenient cleaning.
Vertical Injection Moulding Machine-50 Ton Rotary vertical injection molding machine
Request Callback
₹ 1400000 / Unit Get Latest Price
Product Brochure
| Clamping Force | 0-100 ton |
| Automation Grade | Semi-Automatic, Automatic, Manual |
| Raw Material | PP, PS, PE, PMMA, HDPE |
| Max. Shot Weight | 89(3.1) |
| Machine Structure | Vertical |
| Power Source | 7.5(5.5) Hp kw |
| Orientation | Vertical |
| Brand | Tokima |
| Plastic Type | PET, PVC, PP, PE |
| Condition | New |
| Country of Origin | Made in India |
| top platen size mm | 540x480 |
| mold size (mm) | 300x200 |
| Total wattage KW | 7.3 |
Minimum order quantity: 1 Unit
Knowing us a renowned organization, we are engaged in offering an extensive range of Veritcal thermoset injection Moulding Machine to meet the demands of our clients.
Tokima 90 ton Hydraulic Injection Molding Machine
Request Callback
₹ 1455000 / unit Get Latest Price
Product Brochure
| Brand | TOKIMA |
| Automation Grade | Automatic |
| Capacity | 100-850 TON |
| Material | Stainless Steel |
| Raw Material | PP, HDPE, PE |
| Plastic Type | PP, PET, PE |
| Machine Structure | Vertical and Horizontal |
We, Anantha Naayaki Enterprises, with our establishment in the year, 1996, are one among the eminent manufacturers of a wide range of the range of Injection Moulding Machine, Cooling Tower, Hopper Dryer, Plastic Scrap Grinder Machine, Injection Moulding Machine Controller, and Cap Moulding Machine. These machines are appreciated for precision designing, easy to operate, corrosion resistance, high performance, and durability. We are also involved in providing maintenance and repairing services for these machines.
Vertical Injection Moulding Machine
Request Callback
₹ 1700000 / Unit Get Latest Price
Product Brochure
| Automation Grade | Automatic |
| Clamping Force | 30 tons |
| Machine Structure | veritcal |
| Power Source | hydraulic |
| Product Type | wiring horns insert molding components |
| Max. Shot Weight | 100gms |
| Max. Plasticizing Capacity | 200gms |
| Injection Pressure | 2000kg/cm |
Minimum order quantity: 1 Unit
We are manufactures of veritcal injection molding machine for thermoplastic and thermoset plastics and rubber molding , insert molding components .We, Anantha Naayaki Enterprises, with our establishment in the year, 1996, are one among the eminent manufacturers of a wide range of the range of Injection Moulding Machine, Cooling Tower, Hopper Dryer, Plastic Scrap Grinder Machine, Injection Moulding Machine Controller, and Cap Moulding Machine. These machines are appreciated for precision designing, easy to operate, corrosion resistance, high performance, and durability. We are also involved in providing maintenance and repairing services for these machines.
Servo Motor Injection Moulding Machine
Request Callback
₹ 1450000 / Piece Get Latest Price
Product Brochure
| Brand | TOKIMA |
| Capacity | 100-850TON |
| Material | Stainless Steel |
| Automation Grade | Automatic |
| Machine Structure | Horizontal, Vertical |
| Plastic Type | PE, PP, PET |
| Phase | Three Phase |
| I Deal In | New and Second Hand |
We, Anantha Naayaki Enterprises, with our establishment in the year, 1996, are one among the eminent manufacturers of a wide range of the range of Injection Moulding Machine, Cooling Tower, Hopper Dryer, Plastic Scrap Grinder Machine, Injection Moulding Machine Controller, and Cap Moulding Machine. These machines are appreciated for precision designing, easy to operate, corrosion resistance, high performance, and durability. We are also involved in providing maintenance and repairing services for these machines.
TOKIMA 90 Q series
Request Callback
₹ 1375000 / Piece Get Latest Price
Product Brochure
| Brand | TOKIMA |
| Clamping Force | screw type injection moulding |
| Machine Structure | vertical |
| Max. Shot Weight | 29,45 and 64 |
| Machine Type | automatic |
| Injection Pressure | 2730,1747 and 1213 |
| Oil Tank Capacity | 100 L |
| Weight | 1.1 - 1. tons |
| Screw Diameter | 20,25 and 30 |
| Nozzle Contact Force | 2 tons |
| Injection Rate | 22,35 and 50 |
| Size | 1.6 x 1.24 x 1.9 |
| I Deal In | New Only |
| Nozzle Stroke | 140mm |
| Ejector Stroke | 45/35 mm |
| Opening Stroke | 180mm |
Minimum order quantity: 1 Piece
We are one among the eminent manufacturers of a wide range of the range of Injection Moulding Machine, Cooling Tower, Hopper Dryer, Plastic Scrap Grinder Machine, Injection Moulding Machine Controller, and Cap Moulding Machine. These machines are appreciated for precision designing, easy to operate, corrosion resistance, high performance, and durability. We are also involved in providing maintenance and repairing services for these machines.
TOKIMA 90 Ton Chennai
Request Callback
₹ 1350000 / Piece Get Latest Price
Product Brochure
| Work Location | chennai |
| Size | 3.9x1.2x1.8 Meter |
| I Deal In | New Only |
| Finished Product Delivery Type | Self Pick Up |
| Country of Origin | Made in India |
We are one among the eminent manufacturers of a wide range of the range of Injection Moulding Machine, Cooling Tower, Hopper Dryer, Plastic Scrap Grinder Machine, Injection Moulding Machine Controller, and Cap Moulding Machine. These machines are appreciated for precision designing, easy to operate, corrosion resistance, high performance, and durability. We are also involved in providing maintenance and repairing services for these machines.
Insert Vertical Rotary injection mouding Machine
Request Callback
₹ 1450000 / Piece Get Latest Price
Product Brochure
| I Deal In | New Only |
| Country of Origin | Made in India |
| Minimum Order Quantity | 1 |
| condition | new |
| location | Chennai |
We are one among the eminent manufacturers of a wide range of the range of Injection Moulding Machine, Cooling Tower, Hopper Dryer, Plastic Scrap Grinder Machine, Injection Moulding Machine Controller, and Cap Moulding Machine. These machines are appreciated for precision designing, easy to operate, corrosion resistance, high performance, and durability. We are also involved in providing maintenance and repairing services for these machines.
TOKIMA 100 Q series
Request Callback
₹ 1650000 / unit Get Latest Price
Product Brochure
| Clamping Force | 1000 KN |
| Machine Type | injection moulding type |
| Screw Diameter | 35,38 and 42 |
| Mould Height | 380 MM (Max) |
| Mould Opening Stroke | 350 mm |
| Ejector Stroke | 120 mm |
| Machine Weight | 3.4 Ton |
| Brand | TOKIMA |
Anaatha Naayaki Industries was started by Mr, R.S. Murugesan who is a Technocart having more than 28 years of engineering and Industrial Experience in Plastic injection Molding Machinces.
Our company is in existence since 1996 and till 2011 we have distributed new and used injection Molding Machine, with after-sales service back up. We started manufacuring on our own since 2011 in the name of TOKIMA by supplying good quality injection Molding Machinces to all Indian Manufactures and users.
Our company is in existence since 1996 and till 2011 we have distributed new and used injection Molding Machine, with after-sales service back up. We started manufacuring on our own since 2011 in the name of TOKIMA by supplying good quality injection Molding Machinces to all Indian Manufactures and users.
Horizontal Plasic Injection Molding Machine
Request Callback
₹ 1800000 / Piece Get Latest Price
Product Brochure
| Brand | TOKIMA |
| Capacity | 100 T |
| Material | ALL PLASTIC RAW MATERIALS |
| Machine Type | Toggle |
| Clamping Force | 100 T |
| Screw Diameter | 38 mm |
| Frequency | 50 Hz |
| Mould Height | 370 |
| Pump Motor | 13 kw |
| Mould Opening Stroke | 350 |
| Ejector Stroke | 120 |
| Heater | 7.5 kw |
| Machine Weight | 3.5 Ton |
| Usage/Application | for Automobile plastic parts and many more |
Being one of the trustworthy names of the business, we bring forth Energy Saving Injection Moulding Machine. Procured from our vendors, the proffered selection is applauded for its durable plastic body, speedy operation, efficient performance, tough construction and low maintenance.
Features:
Features:
- Longer service life
- Operationally fluent
- Easy to operate
Injection mouding Plastic Water Bottle Cap Making Machine
Request Callback
₹ 1550000 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Machine Capacity | TM-130 |
| Screw Diameter | 42 mm |
| Shot Wwight Capacity | 252 gms |
| Tiebar Distance | 420*420mm |
| Min*Max Mould Height | 160*450 |
| Machine Type | Automatic |
| Material | Nilon, Gf, Pp, Pom, Hdpe etc. |
We are one among the eminent manufacturers of a wide range of the range of Injection Moulding Machine, Cooling Tower, Hopper Dryer, Plastic Scrap Grinder Machine, Injection Moulding Machine Controller, and Cap Moulding Machine. These machines are appreciated for precision designing, easy to operate, corrosion resistance, high performance, and durability. We are also involved in providing maintenance and repairing services for these machines.
Bottle Cap Making Machine
Request Callback
₹ 1550000 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| screw diameter | 42mm |
| shot weight capacity | 252 gmss |
| tiber distance | 420*420 mm |
| machine type | TM-130 |
We are one among the eminent manufacturers of a wide range of the range of Injection Moulding Machine, Cooling Tower, Hopper Dryer, Plastic Scrap Grinder Machine, Injection Moulding Machine Controller, and Cap Moulding Machine. These machines are appreciated for precision designing, easy to operate, corrosion resistance, high performance, and durability. We are also involved in providing maintenance and repairing services for these machines.
Horizontal 100 Ton Plastic Injection Moulding machine
Request Callback
₹ 1699000 / Piece Get Latest Price
Product Brochure
| Operation Mode | Automatic |
| Brand | TOKIMA |
| Clamping Way | Hydraulic |
| Plastic Type | ALL PLASTICS |
| Model Name/Number | TM-100 |
| Clamping Force | 100 TON |
| Warranty | 1 Year |
Very efficient futures in this model,We are offering PLC Based Injection Moulding Machine to our clients.
Clamp Unit:
Injection Unit:
Hydraulic System:
Clamp Unit:
- 5 Point toggle clamping System Of steel Casting with steel link and Steel pin.
- Hydraulic ejector through the plate with multiple ejector cycles up to 9 strokes.
- Multiple point automatic lubrication system.
- Clamp closing and clamp opening profile with programmable and independent strokes and speeds.
- Low-pressure mould protection.
- Freely programmable control of max.2 core pulls and air for the control of max 1 valve.
Injection Unit:
- Injection movement is actuated by two hydraulic cylinders for perfect alignment to the clan unit
- Injection unit sliding on hard chrome steel treated, ground tie-bars easy access to the screw is ensured by the swivelling movement
- Gas nitride screw barer with standard l/d ratio
- Stainless Steel hopper with magnetic grill mounted on a swivelling system to permit easy change of material
- Injection Speed, pressure and holding time profile on 7 steps
- Cold start protection
Hydraulic System:
- Components easily accessible for maintenance purposes
- Suction and delivery oil filters
- Proportion valves for pressure and delivery control with electronic feedback
- Sealed oil tank with oil temperature Control
- Resiliently mounted hydraulic pump
Horizontal 160 Ton Plastic Injection Moulding Machine
Request Callback
₹ 2599000 / Piece Get Latest Price
Product Brochure
| Operation Mode | Automatic |
| Brand | TOKIMA |
| Clamping Way | Hydraulic |
| Plastic Type | ALL PLASTICS |
| Model Name/Number | TM-160 |
| Clamping Force | 160 TON |
| Structure | Horizontal |
| Oil Tank Capacity | 100 L |
Todays Investment, tomorrow's profit, Very efficient and power savings, so get more production in lower cost of Investment and running cost Being one of the trustworthy names of the business, we bring forth Energy Saving Injection Moulding Machine. Procured from our vendors, the proffered selection is applauded for its durable plastic body, speedy operation, efficient performance, tough construction and low maintenance.
Features:
Features:
- Longer service life
- Operationally fluent
- Easy to operate
Horizontal 220 Ton Plastic Injection Moulding Machine
Request Callback
₹ 2999000 / Piece Get Latest Price
Product Brochure
| Operation Mode | Automatic |
| Brand | TOKIMA |
| Clamping Way | Hydraulic |
| Plastic Type | ALL PLASTICS |
| Model Name/Number | TM-220 |
| Clamping Force | 220 TON |
| Oil Tank Capacity | 100 L |
Todays Investment, tomorrow's profit, Automobile parts are very accurate parts can be done, Very efficient and power savings, so get more production in lower cost of Investment and running cost.We are offering PLC Based Injection Moulding Machine to our clients.
Clamp Unit:
Injection Unit:
Hydraulic System:
Clamp Unit:
- 5 Point toggle clamping System Of steel Casting with steel link and Steel pin.
- Hydraulic ejector through the plate with multiple ejector cycles up to 9 strokes.
- Multiple point automatic lubrication system.
- Clamp closing and clamp opening profile with programmable and independent strokes and speeds.
- Low-pressure mould protection.
- Freely programmable control of max.2 core pulls and air for the control of max 1 valve.
Injection Unit:
- Injection movement is actuated by two hydraulic cylinders for perfect alignment to the clan unit
- Injection unit sliding on hard chrome steel treated, ground tie-bars easy access to the screw is ensured by the swivelling movement
- Gas nitride screw barer with standard l/d ratio
- Stainless Steel hopper with magnetic grill mounted on a swivelling system to permit easy change of material
- Injection Speed, pressure and holding time profile on 7 steps
- Cold start protection
Hydraulic System:
- Components easily accessible for maintenance purposes
- Suction and delivery oil filters
- Proportion valves for pressure and delivery control with electronic feedback
- Sealed oil tank with oil temperature Control
- Resiliently mounted hydraulic pump
Horizontal 300 Ton Plastic Injection Moulding Machine
Request Callback
₹ 3699000 / Piece Get Latest Price
Product Brochure
| Operation Mode | Automatic |
| Brand | TOKIMA |
| Clamping Way | Hydraulic |
| Plastic Type | ALL PLASTICS |
| Model Name/Number | TM-300 |
| Clamping Force | 300 TON |
| Structure | Horizontal |
| Warranty | 1 Year |
Todays Investment, tomorrow's profit, Very efficient and power savings, so get more production rate in lower cost of Investment, suitable for Automobile and Commercial products.We are offering PLC Based Injection Moulding Machine to our clients.
Clamp Unit:
Injection Unit:
Hydraulic System:
Clamp Unit:
- 5 Point toggle clamping System Of steel Casting with steel link and Steel pin.
- Hydraulic ejector through the plate with multiple ejector cycles up to 9 strokes.
- Multiple point automatic lubrication system.
- Clamp closing and clamp opening profile with programmable and independent strokes and speeds.
- Low-pressure mould protection.
- Freely programmable control of max.2 core pulls and air for the control of max 1 valve.
Injection Unit:
- Injection movement is actuated by two hydraulic cylinders for perfect alignment to the clan unit
- Injection unit sliding on hard chrome steel treated, ground tie-bars easy access to the screw is ensured by the swivelling movement
- Gas nitride screw barer with standard l/d ratio
- Stainless Steel hopper with magnetic grill mounted on a swivelling system to permit easy change of material
- Injection Speed, pressure and holding time profile on 7 steps
- Cold start protection
Hydraulic System:
- Components easily accessible for maintenance purposes
- Suction and delivery oil filters
- Proportion valves for pressure and delivery control with electronic feedback
- Sealed oil tank with oil temperature Control
- Resiliently mounted hydraulic pump
Used Plastic Injection Moulding Machine
Request Callback
₹ 2500000 / Piece Get Latest Price
Product Brochure
| Capacity | 50 to 100 ton per day |
| Clamping Way | Hydraulic |
| Plastic Type | PP, PE |
| Operation Mode | Automatic |
| Structure | Horizontal, Horizontal & Vertical |
We, Anantha Naayaki Enterprises, with our establishment in the year, 1996, are one among the eminent manufacturers of a wide range of the range of Injection Moulding Machine, Cooling Tower, Hopper Dryer, Plastic Scrap Grinder Machine, Injection Moulding Machine Controller, and Cap Moulding Machine. These machines are appreciated for precision designing, easy to operate, corrosion resistance, high performance, and durability. We are also involved in providing maintenance and repairing services for these machines.
High Quality Injection Moulding Machine
Request Callback
₹ 3425000 / Unit Get Latest Price
Product Brochure
| Phase | Three Phase |
| Automation Grade | Automatic |
| Machine Structure | Horizontal |
| Clamping Force | 400 ton |
| Condition | New |
| Brand | Tokima |
Minimum order quantity: 320 Unit
Offered to clients at the most reasonable rate possible, the range of High Quality Injection Moulding Machine is widely praised and preferred. Making of this range is done following the guidelines and norms standardized by the industry. Owing to this, the product’s standard of quality never deteriorates.
Features:
Note: We can supply only to following state Tamilnadu, Andhra, Karnataka, Kerala, Pondy, Telangana.
Features:
- High capacity
- Commendable functionality
- Longer functional life
Note: We can supply only to following state Tamilnadu, Andhra, Karnataka, Kerala, Pondy, Telangana.
Energy Saving Injection Moulding Machine
Request Callback
₹ 1550000 / Unit Get Latest Price
Product Brochure
| Screw Stroke | 560 mm |
| Brand | Tokima |
| Screw Diameter | 120 mm |
| Stroke Volume | 550 cc |
| Injection Pressure | 1500 kg/cm2 |
| Ejector Force | 150 kg/cm2 |
| Max Injected Weight | 3900 g |
| Closing Force | 5500 kN |
| Max Daylight | 1600 mm |
| Min Mold Height | 450 mm |
| Distance Between Tie Bars | 1150 mm |
| Molding Opening Stock | 1150 mm |
| Size Of Mold Plates | 1900 x 1900 mm |
Minimum order quantity: 1 Unit
Being one of the trustworthy names of the business, we bring forth Energy Saving Injection Moulding Machine. Procured from our vendors, the proffered selection is applauded for its durable plastic body, speedy operation, efficient performance, tough construction and low maintenance.
Features:
Features:
- Longer service life
- Operationally fluent
- Easy to operate
TOKIMA 450
Request Callback
₹ 6075000 / Piece Get Latest Price
Product Brochure
| Machine Type | injection moulding machine |
| Screw Diameter | 75,80 and 85 |
| Mould Height | 820 mm (Max) |
| Pump Motor | 45 KW (power) |
| Ejector Stroke | 200mm |
| Machine Weight | 18.8 Ton |
| No Of Heating Zones | 6 |
Our Company is in existence since 1996 and till 2011 we have distributed new and used injection molding machine, with after-sales service backup. we started manufacturing on our since 2011 in the name of TOKIMA by supplying good quality injection molding machines to all Indian Manufactures and users
Horizontal 400 Ton Plastic Injection Moulding Machine
Request Callback
₹ 5399000 / Piece Get Latest Price
Product Brochure
| Operation Mode | Automatic |
| Brand | TOKIMA |
| Clamping Way | Hydraulic |
| Plastic Type | ALL PLASTICS |
| Model Name/Number | TM-400 |
| Clamping Force | 400 TON |
| Structure | Horizontal |
| Warranty | 1 Year |
Todays Investment, tomorrow's profit, Very efficient in Higher tonage, and power savings, so get more production in lower cost of Investment and running cost.We are offering PLC Based Injection Moulding Machine to our clients.
Clamp Unit:
Injection Unit:
Hydraulic System:
Clamp Unit:
- 5 Point toggle clamping System Of steel Casting with steel link and Steel pin.
- Hydraulic ejector through the plate with multiple ejector cycles up to 9 strokes.
- Multiple point automatic lubrication system.
- Clamp closing and clamp opening profile with programmable and independent strokes and speeds.
- Low-pressure mould protection.
- Freely programmable control of max.2 core pulls and air for the control of max 1 valve.
Injection Unit:
- Injection movement is actuated by two hydraulic cylinders for perfect alignment to the clan unit
- Injection unit sliding on hard chrome steel treated, ground tie-bars easy access to the screw is ensured by the swivelling movement
- Gas nitride screw barer with standard l/d ratio
- Stainless Steel hopper with magnetic grill mounted on a swivelling system to permit easy change of material
- Injection Speed, pressure and holding time profile on 7 steps
- Cold start protection
Hydraulic System:
- Components easily accessible for maintenance purposes
- Suction and delivery oil filters
- Proportion valves for pressure and delivery control with electronic feedback
- Sealed oil tank with oil temperature Control
- Resiliently mounted hydraulic pump
TOKIMA 350
Request Callback
₹ 4700000 / Piece Get Latest Price
Product Brochure
| Brand | TOKIMA |
| Machine Type | injection moulding machine |
| Clamping Force | 3500KN |
| Screw Diameter | 70,75 and 80 |
| Mould Height | 750mm(MAX) |
| Pump Motor | 37 KW |
| Mould Opening Stroke | 670mm |
| Ejector Stroke | 170mm |
| Machine Weight | 12.5Ton |
| No Of Ejector Bar | 4 |
| Screw Ld Ratio | 21.5,20 and 19 |
| Space Between Tie Bar | 115mm |
| Clamp Tonnage | 3500KN |
| Dimension | (LxWxH) = 7.3 x 1.8 x 2.2 |
We not provide a machine to our customers, but fine solution and strategy thereby make indiviual machines for customers who have special requriments. company believes, "customer service should not just be a department, it should be the entire company"
250 Ton Horizontal Injection Moulding Machine
Request Callback
₹ 3400000 / Unit Get Latest Price
| Clamping Force | 250 TON |
| Machine Type | Plastic injection molding machine |
| Screw Diameter | 55mm |
| Ejector Stroke | 150mm |
| Machine Weight | 8.3 ton |
| Brand | TOKIMA |
| Country of Origin | Made in India |
| Shot weight (ps) | 641g |
| Tie bar distance mm | 570x570 |
| Machine Dimension(LxWxH) | 6.2x1.5x2.2 |
'Tokima Machinery " Designed for Plastic component
Manufacturing with new advanced technology machines with energy saving concept .
* Precision Products
* Automobile Products
* Medical Prodcuts
* Commercial Prodcuts
Manufacturing with new advanced technology machines with energy saving concept .
* Precision Products
* Automobile Products
* Medical Prodcuts
* Commercial Prodcuts
450 Ton Horizontal Injection Moulding Machine
Request Callback
₹ 5975000 / Unit Get Latest Price
| Clamping Force | 450 ton |
| Machine Type | Plastic injection molding machine |
| Screw Diameter | 80mm |
| Frequency | PLC |
| Ejector Stroke | 185mm |
| Machine Weight | 12.5 ton |
| Brand | TOKIMA |
| Country of Origin | Made in India |
| Shot weight (ps) | 1770g |
| Tie bar distance (mm) | 760x760 |
| Machine dimension (LxWxH) | 7.3X1.8X2.2 |
Minimum order quantity: 1 Unit
'Tokima Machinery " Designed for Plastic component
Manufacturing with new advanced technology machines with energy saving concept .
* Precision Products
* Automobile Products
* Medical Prodcuts
* Commercial Prodcuts
Manufacturing with new advanced technology machines with energy saving concept .
* Precision Products
* Automobile Products
* Medical Prodcuts
* Commercial Prodcuts
120 Ton Horizontal Injection Molding Machine
Request Callback
₹ 1885000 / Unit Get Latest Price
| Clamping Force | 130 TON |
| Machine Type | Plastic injection molding machine |
| Screw Diameter | 42mm |
| Ejector Stroke | 140mm |
| Machine Weight | 4 TON |
| Brand | TOKIMA |
| Country of Origin | Made in India |
| Shot volume cm3 | 277 |
| Tie bar distance mm | 420x420 |
| Machine dimension(LxWxH) | 4.6x1.5x2.1 |
'Tokima Machinery " Designed for Plastic component
Manufacturing with new advanced technology machines with energy saving concept .
* Precision Products
* Automobile Products
* Medical Prodcuts
* Commercial Prodcuts
Manufacturing with new advanced technology machines with energy saving concept .
* Precision Products
* Automobile Products
* Medical Prodcuts
* Commercial Prodcuts
Plastic Injection Machine
Request Callback
₹ 1500000 / Piece Get Latest Price
Product Brochure
| Machine Type | Injection Blow Molding |
| Clamping Way | Hydraulic |
| Brand | tokima |
| Operation Mode | Automatic |
| Plastic Type | PP, PE |
| Structure | Horizontal |
| I Deal In | New Only |
We, Anantha Naayaki Enterprises, with our establishment in the year, 1996, are one among the eminent manufacturers of a wide range of the range of Injection Moulding Machine, Cooling Tower, Hopper Dryer, Plastic Scrap Grinder Machine, Injection Moulding Machine Controller, and Cap Moulding Machine. These machines are appreciated for precision designing, easy to operate, corrosion resistance, high performance, and durability. We are also involved in providing maintenance and repairing services for these machines.
TOKIMA 120 Q SERIES
Request Callback
₹ 1600000 / Piece Get Latest Price
Product Brochure
| Brand | TOKIMA |
| Clamping Force | 100-300 ton |
| Material | Mild Steel |
| Automation Grade | Automatic |
| Machine Structure | Horizontal |
| Maximum Injection Pressure | 154-209 mpa |
| Machine Dimension | 4.8X1.3X1.85 METER |
| Machine Weight | 3.9 ton |
| Pump Motor | 18 KW |
| Tonnage | 120 TON |
| Opening Stroke | 380MM |
| Maximum Mould Height | 440MM |
| Minimum Mould Height | 140MM |
| Screw Revolution | 180-208RPM |
| I Deal In | New Only |
| Maximum screw rotation speed | 180-200 |
| Clamping stroke | 120 TON |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
TOKIMA produces wide range of plastic injection molding machines more than 20 times with mold clamp force ranging from 70 to 1000 tons and injection weight grams 48 grams to 4000grams. Our Product integrates the latest mechanical, electrical and hydraulic technologies into one which includes servo enery-saving series, rugged design series, thin wall series, pet series, PVC and bottle cap series.
Horizontal 450 Ton Plastic Injection Moulding Machine
Request Callback
₹ 6099000 / Piece Get Latest Price
Product Brochure
| Operation Mode | Automatic |
| Brand | TOKIMA |
| Clamping Way | Hydraulic |
| Plastic Type | ALL PLASTICS |
| Model Name/Number | TM-450 |
| Clamping Force | 450 TON |
| Structure | Horizontal |
| Warranty | 1 Year |
Todays Investment, tomorrow's profit, Very efficient in higher tonage and power savings, so get more production in lower cost of Investment and running cost.We are offering PLC Based Injection Moulding Machine to our clients.
Clamp Unit:
Injection Unit:
Hydraulic System:
Clamp Unit:
- 5 Point toggle clamping System Of steel Casting with steel link and Steel pin.
- Hydraulic ejector through the plate with multiple ejector cycles up to 9 strokes.
- Multiple point automatic lubrication system.
- Clamp closing and clamp opening profile with programmable and independent strokes and speeds.
- Low-pressure mould protection.
- Freely programmable control of max.2 core pulls and air for the control of max 1 valve.
Injection Unit:
- Injection movement is actuated by two hydraulic cylinders for perfect alignment to the clan unit
- Injection unit sliding on hard chrome steel treated, ground tie-bars easy access to the screw is ensured by the swivelling movement
- Gas nitride screw barer with standard l/d ratio
- Stainless Steel hopper with magnetic grill mounted on a swivelling system to permit easy change of material
- Injection Speed, pressure and holding time profile on 7 steps
- Cold start protection
Hydraulic System:
- Components easily accessible for maintenance purposes
- Suction and delivery oil filters
- Proportion valves for pressure and delivery control with electronic feedback
- Sealed oil tank with oil temperature Control
- Resiliently mounted hydraulic pump
Tokima 16 inch Scrap Grinder
Request Callback
₹ 160000 / Piece Get Latest Price
| Automation Grade | Automatic |
| Material | Iron |
| Country of Origin | Made in India |
Acclaimed among our clientele for offering the finest products, we proudly introduce our Plastic Scrap Grinder Machine. The offered range of Plastic Scrap Grinder Machine is widely appreciated by the clients for its features such as robust construction, easy operation, fast grinding, high production and excellent performance.
Features
Specifications
Features
- Hollow materials, Footwears, Cans, Bucket.
- Grinders are made from the solid steel construction
- Easy operating & fast grinding
- Minimum floor space and high production capacity
- Quick and easy blade setting & changing system
Specifications
| Model | VTM-12" | VTM-16" | VTM-18" | VTM-20" | VTM-25" |
| Power Required | 5 HP, 3.75 kW | 7.5 HP, 5.6 kW | 10 HP, 7.5 kW | 15 HP, 11.25 kW | 25 HP, 18.65 kW |
| Length of Blades | 12" | 16" | 18" | 20" | 25" |
| No. of Blade | 5 | 5 | 5 | 5 | 5 |
| Throat Size | 12"X12" | 16"X16" | 18" X 18" | 20" X 20" | 25" X 25" |
| Grinding capacity | 60 to 90 kgs/hr | 90 to 120 kgs/hr | 90 to 140 kgs/hr | 140to 180 kgs/hr | 275 to 350 kgs/hr |
X
Product Videos
View All
PVC Injection Moulding Machine
Get QuoteContact Us
Murugesan R. S. (CEO)
Anantha Naayaki Enterprises
No 1/10, Perumal Koil Street, Peria Koladi, Thiruverkadu, Chennai - 600077, Tamil Nadu, India
Send Email